Dynamic Weighing Single Point Load Cell / Checkweigher Load Cell GM 200 manufacturer from China Shenzhen General Measure Technology Stock Co., Ltd.

Place of Origin:

Zhejiang, China (Mainland)

Product Detail

Model No.: GM 200

Dynamic Weighing Single Point Load Cell / Checkweigher Load Cell

<ul style="list-style-type:s

Dynamic Weighing Single Point Load Cell / Checkweigher Load Cell

Double bending beam load cell with Beryllium-Copper measuring element:
- Outstanding linearity and hysteresis
- High resistance at fatigue and shock
Viscous damping specially for use in dynamic weighing applications:
- Faster settling time
- Higher weighing speeds
- Increase load cell life
- Stainless-Steel housing
- Protected against humidity IP 65 (EN 60529)
- Single point load cell, for off-center loads
- Integrated on-center overload protection
- 6 wire (sense) electrical connection

SPECIFICATIONS
Nominal capacities (Ln)	2-3-5-7.5-10 15-20-30	kg
Accuracy class	0.05	%
Minimum dead load	0	%Ln
Service load	150	%Ln (1)
Safe load limit	200	%Ln (1)
Total error	< ±0.05	%Sn (2)
Repeatability error	< ±0.015	%Sn
Temperature effect: on zero on sensitivity	< ±0.04 < ±0.02	%Sn/5°K %Sn/5°K
Creep error (30 minutes)	< ±0.035	%Sn
Temperature compensation	0...+40	°C
Temperature limits	-20...+50	°C
Nominal sensitivity (Sn)	2 ±10%	mV/V
Nominal input voltage	10	V
Maximum input voltage	15	V
Input impedance	400 ±20	Ω
Output impedance	350 ±3	Ω
No load output	< ±2	%Sn
Insulation resistance	> 5000	MΩ
Maximum deection (at Ln)	0.2-0.4	mm