Double Bending Beam Load Cell IP Approved For Dynamic Weighing Mod 260 manufacturer from China Shenzhen General Measure Technology Stock Co., Ltd.

Place of Origin:

Zhejiang, China (Mainland)

Product Detail

Model No.: Mod 260

Double Bending Beam Load Cell IP Approved For Dynamic Weighing

<ul style="list-style-ty

Double Bending Beam Load Cell IP Approved For Dynamic Weighing

Double bending beam load cell
4000 divisions O.I.M.L. R60 class C
Viscous damping specially for use in dynamic weighing applications:
- Faster settling time
- Higher weighing speeds
- Increase load cell life
Stainless-Steel housing
Protected against humidity IP 68 (EN 60529)
Single point load cell, for off-center loads on platforms up to 500 x 500 mm (5...35 kg) and 600 x 600 mm (50...200 kg)
Integrated on-center overload protection, with a dual stopper for up and down loads

SPECIFICATIONS
Nominal capacities (Ln)	5-7.5-10 15-20-35 50-75-120-200	kg
Accuracy class	4000	n. OIML
Minimum dead load	0	%Ln
Service load	120	%Ln (1)
Safe load limit	150	%Ln (1)
Total error	< ±0.013	%Sn (2)
Repeatability error	< ±0.01	%Sn
Temperature effect: on zero on sensitivity	< ±0.01 < ±0.006	%Sn/5°K %Sn/5°K
Creep error (30 minutes)	< ±0.012	%Sn
Temperature compensation	-10...+40	°C
Temperature limits	-20...+70	°C
Nominal sensitivity (Sn)	2 ±10%	mV/V
Nominal input voltage	10	V
Maximum input voltage	15	V
Input impedance	400 ±20	Ω
Output impedance	350 ±3	Ω
No load output	< ±2	%Sn
Insulation resistance	> 5000	MΩ
Maximum deection (at Ln)	0.2-0.4	mm